I would like to update my CR-10 firmware, but as soon as I open Cura V4 my printer just starts resetting every 2 - 3 second and Cura writes there is a(n) communication problem. Cura 15.04.3 came with my cr-10 and works OK. Extract rar file in windows 10. In particular it retracts as it should for a flat plate print with holes in it. Any Cura after 2.6 does NOT retract for big hops on the same layer. I turned combing off but still strings all over the place. I recently purchase a CR-10 V3 & BL Touch based on the recommendations of other people. I was very frustrated tying to find the BL Touch firmware that goes with this model. Ended up using the firmware for the V2 model. I certainly hope this was correct. My question is what profile do I use in the CURA slicer; there is NOT one for CR-10 V3. Creality3D CR 10 S5 3D Printer, Creality official 3D Printer store, High-precision CR 10 S5 3D Printer, Buy CR 10 S5 3D Printer Locally in stock, Official buying CR 10 S5 3D printer, Creality3D fast free shipping home, return within 30 days + 1-year warranty, and offer lifetime technical support.
These profiles are compatible with Cura versions 3.3 and below. If you are using Cura 3.2 to 3.3 – follow THIS video guide to set up your profile. We're working on Cura 4.4 compatible profiles. Thanks for your patience!
NOTE: Please make sure to change the base size if you're using either the CR-10 or the Ender 3 respectively.
Author: Greg Kourakos (3D Printing Pro on YouTube)
Printers: Ender 3, Ender 5, Ender 2, CR-10
Slicer: Cura
Purpose: For Minis: Leave as is; For Terrain: Adjust the Layer Height to 0.12-0.2mm (or leave at 0.08mm for additional detail).
Version: 1.0
Open source midi editor windows. Notes: This profile was derived from the Fat Dragon Games Profile made by Tom Tullis. Adjust temperature and retraction settings to your machine. Disable support if the print does not need it.
Author: Greg Kourakos (3D Printing Pro on YouTube)
Printers: Ender 3, Ender 5, Ender 2, CR-10
Slicer: Cura
Purpose: For Minis: Leave as is; For Terrain: Adjust the Layer Height to 0.12-0.2mm (or leave at 0.08mm for additional detail).
Version: 1.0 Top 10 external hard disk 2tb.
Notes: This profile was derived from the Fat Dragon Games Profile made by Tom Tullis. Adjust temperature and retraction settings to your machine. Disable support if the print does not need it.
Author: /u/ Siepie (Modified by 3D Printed Tabletop)
Printers: CR10 & Ender 3
Slicer: Cura
Purpose: Small Miniatures (<30mm)
Version: 1.0
Author: 3D Printed Tabletop
Printers: CR10 & Ender 3
Slicer: Cura
Purpose: Dragons/Large Minis above 0.30mm layer height (0.12mm layer height default, 60mm speed, 10% infill, supports auto enabled)
Version: 1.2
Author: 3D Printed Tabletop
Printers: CR10 & Ender 3
Slicer: Cura
Purpose: Non-mini Terrain (0.12mm layer height default, 60mm speed, 10% infill)
Version: 1.3
Author: 3D Printed Tabletop
Printers: JGAurora A5/A5S
Slicer: Cura
Purpose: Terrain/Dragons/Large Minis above 30mm layer height (0.2mm layer height default) 25% infill (I often lowered to 10-15%), supports auto enabled with new support settings)
Version: 1.0
Cura Free Download Windows 10
Author: 3D Printed Tabletop
Printers: JGAurora A5/A5S
Slicer: Cura
Purpose: Small Minis smaller than 30mm layer height (0.08mm layer height default) 25% infill (I often raised to 30-50%), supports auto enabled with new support settings)
Version: 1.0
*Note: I continued to have issues with certain parts like long swords/staffs, etc. and you might have to do some additional tweaking to minimum layer time, temperature, etc.
Cura Cr 10 Download
